12 - 20 WiNG 5.6 Access Point System Reference Guide
12.1.5.4 Locating a Device
Troubleshooting the Device
In large deployments with a large number of devices, it is very hard to identify a specific device. Use the device’s locator feature
to find the device. Once configured, the device blinks its LEDs in a color that enables it to be identified amongst all other
deployed devices.
To locate a device:
1. Select the target device from the left-hand side of the UI.
Figure 12-28 Device Browser
2. Select the down arrow next to the device to view a set of operations that can be performed on the selected device.
Figure 12-29 Device Browser - Options for a device
3. Select Troubleshooting to expand its sub-menu.
Figure 12-30 Device Browser - Options for a device - Troubleshooting sub-menu
4. To locate the device, click the Flash LEDs item. The following windows displays:
To Next Page
Loading...
