Wireless Configuration 6 - 7
8. Select Allow RADIUS Override to allow the access point to override the client VLAN assignment and use the VLAN
assigned by a RADIUS Server instead. If, as part of the authentication process, the RADIUS server returns a client’s
VLAN ID in a RADIUS Access-Accept packet, and this feature is enabled, all client traffic is forwarded on that VLAN. If
disabled, the RADIUS server returned VLAN ID is ignored and the VLAN configuration (defined in the preceding step) is
used.
If RADIUS authentication fails, the VLAN defined is the VLAN assigned to the WLAN.
9. Select OK when completed to update the WLAN’s basic configuration. Select Reset to revert the screen back to the last
saved configuration.
6.1.1.1 WLAN Basic Configuration Deployment Considerations
Basic WLAN Configuration
Before defining a WLAN’s basic configuration, refer to the following deployment guidelines to ensure the configuration is
optimally effective:
• Deploy separate VLAN for providing secure WLAN access.
• Define separate VLAN for each WLAN providing guest access.
To Next Page
Loading...
