Operations 12 - 59
Figure 12-65 Certificate Management - Export RSA Key screen
11. Define the following configuration parameters required for the Export of the RSA key:
Key Name Enter the 32 character maximum name assigned to the RSA key.
Key Passphrase Define the key passphrase used by the server. Select the Show textbox to expose the
actual characters used in the passphrase. Leaving the option unselected displays the
passphrase as a series of asterisks “*”.
URL Provide the complete URL to the location of the key. If needed, select Advanced to expand
the dialog to display network address information to the location of the target key. The
number of additional fields that populate the screen is also dependent on the selected
protocol.
Protocol Select the protocol used for exporting the RSA key. Available options include:
• tftp
• ftp
• sftp
• http
•cf
•usb1
•usb2
•usb3
•usb4
Port If using Advanced settings, use the spinner control to set the port. This option is not valid
for cf and usb1 - 4.
To Next Page
Loading...
