5 - 214 WiNG 5.6 Access Point System Reference Guide
Figure 5-141 Device Overrides - RF Domain Overrides screen
6. Refer to the Basic Configuration field to review the basic settings defined for the target device’s RF Domain
configuration, and optionally assign/remove overrides to and from specific parameters.
NOTE: A blue override icon (to the left of a parameter) defines the parameter as having
an override applied. To remove a device’s override, go to the Basic Configuration screen’s
Device Overrides field, and then select the Clear Overrides button.
Location Set the deployment location for the access point as part of its RF Domain configuration.
Contact Set the administrative contact for the access point. This should reflect the administrator
responsible for the access point’s configuration and wireless network.
Time Zone Use the drop-down menu to select the geographic time zone supporting its deployment
location.
Country Code Use the drop-down menu to select the country code supporting its deployment location.
To Next Page
Loading...
