5 - 250 WiNG 5.6 Access Point System Reference Guide
20. Select + Add Row as needed to include additional indexes.
21. Refer to the Spanning Tree Port Priority table.
Define an Instance Index using the spinner control and then set the Priority. The lower the priority, a greater likelihood
of the port becoming a designated port.
22. Select + Add Row needed to include additional indexes.
23. Select OK to save the changes made to the Ethernet Port Spanning Tree configuration. Select Reset to revert to the last
saved configuration.
5.4.5.3.4 Radio Override Configuration
Profile Interface Override Configuration
Access points can have their radio profile configurations overridden if a portion of a profile is no longer relevant to the access
point’s deployment objective.
To define a radio configuration override for an access point:
1. Select the Configuration tab from the Web UI.
2. Select Devices from the Configuration tab.
3. Select Device Overrides.
4. Select a target access point from the device browser in the lower, left-hand, side of the UI.
5. Select Interface to expand its sub menu options.
6. Select Radios.
To Next Page
Loading...
