5 - 252 WiNG 5.6 Access Point System Reference Guide
8. If required, select a radio configuration and select the Edit button to modify or override portions of its configuration.
Figure 5-165 Device Overrides - Access Point Radio Settings tab
The Radio Settings tab displays by default.
9. Define or override the following radio configuration Properties:
Channel Lists the channel setting for the radio. Smart is the default setting. If set to smart, the
access point scans non-overlapping channels listening for beacons from other access
points. After the channels are scanned, it selects the channel with the fewest access
points. In the case of multiple access points on the same channel, it will select the
channel with the lowest average power level.
Transmit Power Lists the transmit power for each radio.
Overrides Click the Clear to clear overrides made to this radio interface. This field is blank if there
are no overrides for this radio.
Description Provide or edit a description (1 - 64 characters in length) for the radio that helps
differentiate it from others with similar configurations.
Admin Status Either select the Active or Shutdown radio button to define this radio’s availability. When
defined as Active, the access point is operational and available for client support,
Shutdown renders it unavailable.
Radio QoS Policy Use the drop-down menu to specify an existing QoS policy to apply to the access point
radio in respect to its intended radio traffic. If there’s no existing QoS policy suiting the
radio’s intended operation, select the Create icon.
To Next Page
Loading...
