Motorola WiNG 5.6 - Page 388

5 - 302 WiNG 5.6 Access Point System Reference Guide
46. Select OK to save the changes to the IPv6 RA prefix configuration. Select Exit to close the screen without saving the
updates.
47. Select the OK button to save the changes and overrides to the basic configuration. Select Reset to revert to the last saved
configuration.
48. Select the Security tab.
Figure 5-199 Device Overrides - Network - OSPF Virtual Interface - Security screen
49. Use the IPv4 Firewall Rules drop-down menu to select the IPv4 specific inbound firewall rules to apply to this profile’s
virtual interface configuration. Select the Create icon to define a new IPv4 firewall rule configuration or select the Edit
icon to modify an existing configuration.
Valid Lifetime Time If the lifetime type is set to decrementing, set the time for the prefix's validity. Set the time
in a twenty-four hour format (19:30).
Preferred Lifetime
Type
Set the administrator preferred lifetime for the prefix's validity. Options include External
(fixed), decrementing and infinite. If set to External (fixed), just the Valid Lifetime Sec setting
is enabled to define the exact time interval for prefix validity. If set to decrementing, use the
lifetime date and time settings to refine the prefix expiry period. If the value is set for infinite,
no additional date or time settings are required for the prefix and the prefix will not expire.
The default setting is External (fixed).
Preferred Lifetime
Sec
If the administrator preferred lifetime type is set to External (fixed), set the Seconds, Minutes,
Hours or Days value used to measurement criteria for the prefix's expiration. 30 days, 0 hours,
0 minutes and 0 seconds is the default lifetime.
Preferred Lifetime
Date
If the administrator preferred lifetime type is set to External (fixed), set the date in
MM/DD/YYYY format for the expiration of the prefix.
Preferred Lifetime
Time
If the preferred lifetime type is set to decrementing, set the time for the prefix's validity. Set
the time in a twenty-four hour format (19:30).
Autoconfig Select this option to enable auto configuration. The default setting is enabled.
On Link Select this option to keep the IPv6 RA prefix on the local link. The default setting is enabled.