Wireless Configuration 6 - 71
• When a preconfigured interval has elapsed since the last frame, not necessarily the final frame, - of a set of frames to
be aggregated - was received.
In this enhancement to the standard frame aggregation, the time delay for aggregation is set individually for each traffic
class. For example, voice traffic might not be aggregated but sent immediately, whereas, background data traffic is set a
time delay for aggregating frames and these aggregated frames are sent.
21. Select OK to update radio QoS multimedia optimization settings Select Reset to revert to the last saved configuration.
Smart Aggregation Select to enable Smart Aggregation and dynamically set the time when an aggregated
frame is transmitted.
Max Delay for Best Effort Specify the maximum time in milliseconds to delay best effort traffic. The default setting
is 150 millisecond.
Max Delay for
Background
Specify the maximum time in milliseconds to delay background traffic. The default setting
is 250 millisecond.
Max Delay for Streaming
Video
Specify the maximum time in milliseconds to delay streaming video traffic. The default
setting is 150 millisecond.
Max Delay for Video
Conferencing
Specify the maximum time in milliseconds to delay video conferencing traffic. The default
setting is 40 millisecond.
Max Delay for Voice Specify the maximum time in milliseconds to delay voice traffic. The default setting is 0
millisecond.
Minimum frames per
Aggregate limit
Specify the minimum number of frames to aggregate in a frame before it is transmitted.
The default setting is 8 frames.
Max Mesh Links Specify the maximum number of mesh links for Smart Aggregation. The default setting is
3.
To Next Page
Loading...
