3 - 16 WiNG 5.6 Access Point System Reference Guide
• Captive Portal Authentication and No Encryption – Configures a network that uses a RADIUS server to authenticate
users before allowing them on to the network. Once on the network, no encryption is used for the data being transmitted
through the network. Select this option to use a Web page (either internally or externally hosted) to authenticate users
before access is granted to the network
• External RADIUS Server – When this option is selected, provide the IP address of the external RADIUS server used
for user authentication. Also provide the shared secret in the RADIUS Shared Secret field.
• Onboard RADIUS Server – When this option is selected, a new screen is displayed where additional updates can
be made. For more information on configuring the onboard RADIUS server, see RADIUS Server Configuration on page
3-17.
• PSK authentication, WPA2 encryption – Configures a network that uses PSK authentication and WPA2 encryption.
Select this option to implement a pre-shared key that must be correctly shared between the access point and requesting
clients using this WLAN
• WPA Key – Provide a 64 character HEX key or 8-63 character ASCII key. Use the drop-down to specify the type of
key being provided. Select ASCII or HEX to specify the key type being provided in the WPA Key field.
2. Select Next. The Typical Setup Wizard displays the RADIUS Server Configuration screen if required. For more
information, see RADIUS Server Configuration on page 3-17
Otherwise, the Typical Setup Wizard displays the Summary and Commit screen. For more information, see Summary And
Commit Screen on page 3-19.
To Next Page
Loading...
