7 - 20 WiNG 5.6 Access Point System Reference Guide
10. Select the RADIUS Accounting tab.
Figure 7-12 AAA Policy - RADIUS Accounting tab
11. Refer to the following configured RADIUS Accounting profile details:
Strip Realm Select this option to remove information from the packet when NAI routing is enabled.
Server ID Displays the numerical server index (1-6) for the accounting server when added to the list
available to the access point.
Host Displays the IP address or hostname of the RADIUS authentication server.
Port Displays the port on which the RADIUS server listens to traffic within the access point
managed network. The port range is 1 to 65,535. The default port is 1813.
Server Type Displays the type of AAA server in use either Host, onboard-self or onboard-controller.
Request Attempts Displays the number of attempts a client can retransmit a missed frame to the RADIUS
server before it times out of the authentication session. The available range is from 1 - 10.
The default is 3.
Request Timeout Displays the time from 1 - 60 seconds for the access point’s re-transmission of request
packets. The default is 5 seconds. If this time is exceeded, the authentication session is
terminated.
DSCP Displays the DSCP value as a 6-bit parameter in the header of every IP packet used for
packet classification. The valid range is from 0 - 63, with a default value of 34.
Request Proxy Mode Lists the method of proxy that browsers communicate with the RADIUS authentication
server. The mode could either be None, Through Wireless Controller or Through RF
Domain Manager.
To Next Page
Loading...
