Security Configuration 8 - 25
Figure 8-13 Security - Device Fingerprinting - New Client Identity - Pre-defined Identity screen
6. To create a custom client identity, select Custom and provide a name in the adjacent field and click the OK button at the
bottom of the screen.
7. From the DHCP Match Message Type drop-down menu, select the message type to match. The available options are
request, discover, any and all. Use this option to select the message type on which the fingerprint is matched.
• request - Indicates the fingerprint is only checked with any DHCP request message received from any device.
• discover - Indicates the fingerprint is only checked with any DHCP discover message received from any device.
• any - Indicates the fingerprint is checked with either the DHCP request or the DHCP discover message.
• all - Indicates the fingerprint is checked with both the DHCP request and DHCP discover message.
8. Click the Add Row to add a new signature to include in the client identity.
To Next Page
Loading...
