3 - 26 WiNG 5.6 Access Point System Reference Guide
• Default Gateway - Define a default gateway address for use with the DHCP server configuration. This is a required
parameter.
• DNS Forwarding - Select this option to allow a DNS server to translate domain names into IP addresses. If this
option is not selected, a primary and secondary DNS resource must be specified. DNS forwarding is useful when a
request for a domain name is made but the DNS server, responsible for converting the name into its corresponding
IP address, cannot locate the matching IP address.
• Primary DNS - Enter an IP Address for the main Domain Name Server providing DNS services for the access point's
LAN interface.
• Secondary DNS - Enter an IP Address for the backup Domain Name Server providing DNS services for the access
point's LAN interface
2. Select Next. The Advanced Setup Wizard displays the Radio Configuration screen to set the access point's radios. For more
information, see Radio Configuration on page 3-29.
If Router Mode is selected as the Network Topology, then the Advanced Setup Wizard displays the WAN configuration
screen. For more information, see WAN Configuration on page 3-13.
To Next Page
Loading...
