9 - 18 WiNG 5.6 Access Point System Reference Guide
Figure 9-10 DHCP Pools screen - Static Bindings tab
11. Review existing DHCP pool static bindings to determine if a static binding can be used as is, a new one requires creation
or edit, or if one requires deletion:
12. Select Add to create a new static binding configuration, Edit to modify an existing static binding configuration or Delete
to remove a static binding from amongst those available.
Client Identifier Type Lists whether the reporting client is using a Hardware Address or Client Identifier as its
identifier type.
Value Lists the hardware address or client identifier value assigned to the client when added or
last modified.
IP Address Displays the IP address of the client on this interface that’s currently using the pool name
listed.
To Next Page
Loading...
