Motorola WiNG 5.6 - Page 70

3 - 32 WiNG 5.6 Access Point System Reference Guide
users before allowing them on to the network. Once on the network, no encryption is used for the data transmitted
through the network. Select this option to use a Web page (either internally or externally hosted) to authenticate users
before access is granted to the network.
• External RADIUS Server – When selected, provide the IP address of the external RADIUS server used for user au-
thentication. Also enter the shared secret in the RADIUS Shared Secret field.
• Onboard RADIUS Server – When selected, a new screen displays where further configuration can be performed.
For more information, see RADIUS Server Configuration on page 3-17.
• PSK authentication, WPA2 encryption – Configures a network that uses PSK authentication and WPA2 encryption.
Select this option to implement a pre-shared key that must be correctly shared between the access point and requesting
clients on the WLAN.
• WPA Key – Provide a 64 character HEX key or 8-63 character ASCII key. Use the drop-down to specify the type of
key provided. Select ASCII or HEX to specify the key type provided in the WPA Key field.
• EAP Authentication and WPA2 Encryption – Configures a network that uses EAP authentication and WPA2
encryption.Select this option to authenticate clients within this WLAN through the exchange and verification of
certificates.
• External RADIUS Server – When selected, provide the IP address of the external RADIUS server used for user au-
thentication. Also provide the shared secret in the RADIUS Shared Secret field.
• Onboard RADIUS Server – When selected, a new screen is displayed where further configuration can be per-
formed. For more information, see RADIUS Server Configuration on page 3-17.
2. Select Next. The Advanced Setup Wizard displays the RADIUS Server Configuration screen if required. This screen is only
displayed when Onboard RADIUS Server is selected for either Captive Portal Authentication And No Encryption or
for EAP Authentication and WPA2 Encryption fields. For more information, see RADIUS Server Configuration on page
3-17.
Otherwise, the Advanced Setup Wizard displays the System Information screen. For more information, see System
Information on page 3-33.