12 - 34 WiNG 5.6 Access Point System Reference Guide
14. Optionally select Cancel (from the lower, right-hand corner of the screen) to cancel the upgrade of devices under the
selected RF Domain. The Cancel button is enabled only if there are device undergoing upgrade and they are selected for
cancellation.
15. Select the Upgrade History tab to review an Upgrade History of access point upgrade operations.
Figure 12-45 AP Upgrade screen - Upgrade History screen
16. Refer to the following to assess devices impacted by upgrade operations and their upgrade status:
MAC Address Lists the factory encoded MAC address of a device either currently upgrading or in the
queue of scheduled upgrades.
Result Lists the state of an upgrade operation (downloading, waiting for a reboot etc.).
Upgrade Time Displays whether the upgrade is immediate or set by an administrator for a specific time.
This is helpful to ensure a sufficient number of devices remain in service at any given
time.
Reboot Time Displays whether a reboot is immediate or time set by an administrator for a specific time.
Reboots render the device offline, so planning reboots carefully is central to ensuring a
sufficient number of devices remain in service.
Last Status Lists the last reported upgrade and reboot status of each listed in progress or planned
upgrade operation.
Upgraded By Lists the model of the controller, service platform or access point RF Domain manager
that’s provisioning the image to the listed device.
Hostname Displays the hostname of the access point, if configured.
Device Model Displays the type of access point upgraded.
MAC Address Displays the primary MAC (or hardware identifier) for each device impacted by an
upgrade operation.
To Next Page
Loading...
