Statistics 13 - 61
The IP Name Servers field displays the following:
The Firmware Images field displays the following:
The Upgrade Status field displays the following:
The Sensor Lock field displays the following:
The Power Management field displays the following:
IP Domain Lookup
state
Lists the current state of an IP lookup operation.
Name Server Displays the names of the servers designated to provide DNS resources to this access point.
Type Displays the type of server for each server listed.
Primary Build Date Displays the build date when this access point firmware version was created.
Primary Install Date Displays the date this version was installed.
Primary Version Displays the primary version string.
Secondary Build
Date
Displays the build date when this version was created.
Secondary Install
Date
Displays the date this secondary version was installed.
Secondary Version Displays the secondary version string.
FPGA Version Displays whether a FPGA supported firmware load is being utilized.
PoE Firmware
Version
Displays whether a PoE supported firmware load is being utilized.
Upgrade Status Displays the status of the image upgrade.
Upgrade Status Time Displays the time of the image upgrade.
Sensor Lock Displays whether a lock has been applied to access point sensor capabilities.
Power Management
Mode
Displays the power mode currently invoked by the selected access point.
Power Management
Status
Lists the power status of the access point.
Ethernet Power
Status
Displays the access point’s Ethernet power status.
Radio Power Status Displays the power status of the access point’s radios.