13 - 144 WiNG 5.6 Access Point System Reference Guide
Figure 13-98 Wireless Client - Health screen
The Wireless Client field displays the following:
The User Details field displays the following:
Client MAC Displays the factory encoded MAC address of the selected wireless client.
Hostname Lists the hostname assigned to the client when initially managed by the access point.
Vendor Displays the vendor name (manufacturer) of the wireless client.
State Displays the current operational state of the wireless client. The client’s state can be idle,
authenticated, roaming, associated or blacklisted.
IP Address Displays the IP address the selected wireless client is currently utilizing as a network
identifier.
WLAN Displays the client’s connected access point WLAN membership. This is the WLAN whose
QoS settings should account for the clients’s radio traffic objective.
Radio MAC Displays the access point radio MAC address the wireless client is connected to on the
network.
VLAN Displays the VLAN ID the access point has defined for use as a virtual interface with the client.
Username Displays the unique name of the administrator or operator managing the client’s connected
access point, controller or service platform.
Authentication Lists the authentication scheme applied to the client for interoperation with the access point.
To Next Page
Loading...
