14 - 8 WiNG 5.6 Access Point System Reference Guide
CERTMGR SRV_CERT_ACTIONS_SUCCESS 6 [str] of
Server Certificate of trustpoint [str] successful
Successful completion of server certificate actions (import,
export etc.)
CERTMGR SVR_CERT_ACTIONS_FAILURE 3 [str] of
Server Certificate of trustpoint [str] failed: [str]
Failure of server certificate actions (import, export etc.)
CERTMGR CSR_EXPORT_SUCCESS 6 Export of
Certificate Signing Request for [str] successful
Successful export of certificate signing request
CERTMGR CSR_EXPORT_FAILURE 3 Export of
Certificate Signing Request for [str] failed: [str]
Failed to export certificate signing request
CERTMGR CRL_ACTIONS_SUCCESS 6 [str] of CRL for
trustpoint [str] successful
Successful completion of certificate revocation list action
CERTMGR CRL_ACTIONS_FAILURE 3 [str] of CRL for
trustpoint [str] failed: [str]
Certificate revocation list action failure
CERTMGR DELETE_TRUSTPOINT_ACTION 6 Deletion
of trustpoint [str] successful
Deletion of trustpoint
CERTMGR IMPORT_TRUSTPOINT 6 Import of Trustpoint
[str] [str]
Import of trustpoint
CERTMGR EXPORT_TRUSTPOINT 6 Export of Trustpoint
[str] [str]//
Export of trustpoint
CERTMGR CERT_EXPIRY 4 [str] certificate for trustpoint
[str] [str]
Certificate expiration
CERTMGR CA_KEY_ACTIONS_SUCCESS 6 [str] of CA
private key for trustpoint [str] successful
Successful completion of CA private key actions
CERTMGR CA_KEY_ACTIONS_FAILURE 3 [str] of CA
private key for trustpoint [str] failed: [str]
Failure of CA private key actions
CLUSTER CMASTER_CFG_UPDATE_FAIL 3 Cluster
master config update to [str] failed, Err: [str]
Cluster master config update failed
CLUSTER MAX_EXCEEDED 4 Max cluster members
([uint]) exceeded, clustering will not function properly
until corrected
Max cluster count exceeded
CLUSTER STATE_CHANGE 4 Active cluster member
changed. Present active [str]. Previous active [str].
Active cluster membership change
CLUSTER STATE_CHANGE_INACTIVE 4 Member [str]
(load[int]) changing state from Active to Standby. New
member [str] standby load [int].
Cluster member change from active to standby
CLUSTER STATE_CHANGE_ACTIVE 4 Member [str]
(load[int]) changing state from Standby to Active. New
member [str] standby load [int]
Cluster member change from standby to active
CLUSTER STATE_RETAIN_ACTIVE 4 Member [str]
(load[int]) retaining Active state. New member [str]
standby load [int]
Cluster member retaining active state
To Next Page
Loading...
