WiNG Events 14 - 17
NSM IF_FAILOVER 5 Interface [str] failover to Interface
[str]
Interface failover
NSM IF_FAILBACK 5 Interface [str] failback to Interface
[str]
Interface failback
PM PROCSTART 6 Starting process [str]
Process started
PM PROCRSTRT 3 Process str]"is not responding.
Restarting process
Process restarted
PM PROCMAXRSTRT 1 Process [str] reached its
maximum number of allowed restarts
Process reached max number of restarts
PM PROCSYSRSTRT 0 Process [str] reached its
maximum number of allowed restarts. Rebooting the
system.
Process reached max restarts. Rebooting system.
PM PROCSTOP 5 Process [str] has been stopped Process has been stopped
PM PROCID 5 Process [str] changed its PID from [int] to
[int]
Process changed PID
PM STARTUPCOMPLETE 5 System startup complete System startup completed
PM PROCNORESP 4 Process [str] is not responding
([uint]/[uint])
Process is not responding
RADCONF RADIUSDSTART 6 Radius Server Started
RADIUS server started
RADCONF RADIUSDSTOP 6 Radius Server Stopped RADIUS server stopped
RADCONF COULD_NOT_STOP_RADIUSD 3 radiusd
could not be stopped
RADIUS server failed to stop
RADIO RADIO_STATE_CHANGE 5 Radio [qstr] changing
state from [qstr] to [qstr]
Radio state changed
RADIO RADAR_SCAN_STARTED 6 Radar scan on
primary channel [uint] freq [uint] MHz for a duration
[uint] secs on radio [qstr]
Radar scan started
RADIO RADAR_SCAN_COMPLETED 6 Radar scan done
on primary channel [uint] freq [uint] MHz on radio [qstr]
Radar scan completed
RADIO RADAR_DETECTED 4 Radar found on channel
[uint] freq [uint] MHz
Radar detected
RADIO RADAR_DET_INFO 4 Radar info: Radio: [qstr].
New channel: [uint] freq [uint] MHz. Scan time: [uint]
secs
Radar info
RADIO RESUME_HOME_CHANNEL 6 Operation on
home channel [uint] freq [uint] MHz resumes on radio
[qstr] after earlier radar detect
Radio resuming on home channel
To Next Page
Loading...
