MUTOH spitfire 90 - Replacing the SLIDE Motor Assembly (Wiper Arm)

Spitfire – Maintenance Manual
127
AP-74096, Rev. 1.0, 09/06/05
4.8.5. Replacing the SLIDE motor assembly (wiper arm)
Caution :
The motor is hot after the product has been operated, so be careful not to burn yourself.
Step 1 : Follow the instructions in "Replacing the maintenance assembly" to remove the maintenance
assembly.
Step 2 : Remove the 2 screws fixing the SLIDE motor assembly.
1 = SLIDE motor assembly 2 = Screws (M3x6) fixing the SLIDE motor assembly
Step 3 : Replace the SLIDE motor assembly.
Step 4 : Reinstall all parts in the opposite order of the removal procedure.