MUTOH spitfire 90 - Head Voltage

Spitfire – Maintenance Manual
210
AP-74096, Rev. 1.0, 09/06/05
Step 6 : Press the [F1] key.
Step 7 : Press the [F4] key.
Step 8 : The password has been inserted. Use the [F1], [F2], [F3] and [F4] key to insert the MAC
address.
Step 9 : Press the [ENTER] key to confirm.
Step 10 : Press the [POWER] key to power OFF the unit.
6.3.4 Head Voltage
In this menu, you can change the head voltage compensation value from -9 to +2.5. The default value is 0.
If your Spitfire does not print perfectly in 360x360, change the value to optimize your printquality.
* Head VLT *
0.0 +
-