MUTOH spitfire 90 - Replace the Cover R Sensor Assembly and the Cover L Sensor Assembly

Spitfire – Maintenance Manual
102
AP-74096, Rev. 1.0, 09/06/05
4.6.8. Replace the cover R sensor assembly and the cover L sensor
assembly
Notes :
¾ Remove following covers before replacing the cover R sensor assembly and the
cover L sensor assembly.
 Side cover R: refer to "Removing side cover R"
 Side cover L: refer to "Removing side cover L"
 Front cover: refer to "Removing the front cover"
 Y rail cover: refer to "Removing the Y rail cover"
(1) Replacing the cover R sensor assembly
Step 1 : Remove the cover R sensor assembly connector from the Mainboard assembly.
Step 2 : Remove the 2 screws fixing the cover R sensor assembly.
1 = Cover R sensor assembly 2 = Screws (M2x8) fixing the cover R sensor assembly
Step 3 : Replace the cover R sensor assembly.
Step 4 : Reinstall all parts in the opposite order of the removal procedure.
Step 5 : Perform cover sensor adjustment according to "Cover sensor adjustment".
(2) Replacing the cover L sensor assembly
Step 1 : Remove media guide F.
Step 2 : Remove the cover L sensor assembly connector from the cover L cable.
Step 3 : Remove the 2 screws fixing the cover L sensor assembly.
1 = Cover L sensor assembly 2 = Screws (M2x8) fixing the cover L sensor assembly
Step 4 : Replace the cover L sensor assembly.
Step 5 : Reinstall all parts in the opposite order of the removal procedure.
Step 6 : Perform cover sensor adjustment according to "Cover sensor adjustment".