Spitfire – Maintenance Manual
144
AP-74096, Rev. 1.0, 09/06/05
Step 4 : Press the [F2] key or the [F4] key on the operation panel to modify the set value.
Step 5 : To save the modified value, press the [ENTER] key on the operation panel.
¾ The modified set value is stored and a next item is displayed.
Notes :
¾ If you press the [CANCEL] key instead of the [ENTER] key, the modification will not
be stored.
Notes :
¾ Modifications will be stored definitely when the machine’s memory has been
powered off once. If the machine is not powered off properly, all changes made will
be ignored !
To Next Page
Loading...
