MUTOH spitfire 90 - Page 294

Spitfire – Maintenance Manual
294
AP-74096, Rev. 1.0, 09/06/05
(2) Make sure that
the connections of
the panel cable
connectors at the
panel unit assembly
side and the
Mainboard
assembly side is
good.
• Check the panel
cables for skewed
insertion.
• Make sure that
they are securely
locked.
• Check the
connections of the
following
connectors.
• Mainboard : J105
• Panel board : J301
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.Þ
(3) The panel unit
assembly may be
damaged.
• Replace the panel
board assembly.
→ Removing the
panel unit assembly.
(4) The Mainboard
assembly may have
a problem.
• Replace the
Mainboard
assembly.
→ Replacing the
Mainboard
assembly,
HDD_Extension
board assembly,
HEAD_DRV board
assembly and
cooling fan
assembly.
12 Printing does not start even if
data is received.
(1) Refer to
“Problems relating
to online and
functions”.
-
→ Problems relating
to online and
functions.