Spitfire – Maintenance Manual
38
AP-74096, Rev. 1.0, 09/06/05
Notes :
• Avoid the following temperature and humidity conditions. Otherwise, printed
images may appear differently from what you expect:
o Places where sudden changes in temperature and humidity are expected,
even though the condition is within the range written above.
o Places where direct sunlight or excessive lighting are expected.
o Places where air conditioners blow directly.
• MUTOH recommends that the printer should be installed where air conditioning can
be adjusted easily.
3.4.1.2.
Required space
Install the product on a flat surface that fulfills the following conditions.
Notes :
• Refer to “Product Specifications” of the User's Guide for the information of the
product.
a
1500mm
b
1500mm
c
2500mm
d
600mm
e
1250mm
To Next Page
Loading...
