Spitfire – Maintenance Manual
45
AP-74096, Rev. 1.0, 09/06/05
Step 4 : Remove the top of the side cover R.
Step 5 : Remove the 4 bolts from the front and back of the inner surface on the bottom of side cover R
and the front cover nut.
1 = Hexagon socket head cap screws (M4x16) 2 = Cover nut
Step 6 : Remove the 6 bolts from the front and back of the bottom surface on the bottom of the side cover
R.
Step 7 : Remove the bottom of side cover R.
1 = Hexagon socket head cap screws (M5x18)
Step 8 : Replace the parts inside the printer.
Step 9 : Reinstall all parts in the opposite order of the removal procedure.
To Next Page
Loading...
