1 ENGINE SYSTEMS 29
Fuel Injectors
Figure 22 Fuel injector assembly
1. E x haust port (oil) (2)
2. Inletport(oil)
3. Control valve body
4. OPEN coil
5. Intensifier piston spring
6. Upper O-ring
7. Nozzle assembly
8. Needle
9. Nozzle gasket
10. Valve Opening Pressure (VOP)
spring
11. Lower O-ring
12. Reverse flow check
13. Edge filter
14. Fuel inlet check ball
15. Fuel inle t (4)
16. Plunger
17. Barrel
18. Intensifier piston
19. CLOSE coil
20. Spool valve (control valve)
EGES-270-1
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
To Next Page
Loading...
