3 DIAGNOSTIC SOFTWARE OPERATION 93
Reset Change Engine Oil Interval
Message
Using EST
1. TurntheignitionswitchtoON.
Figure 103 Select Service Interval session
2. Select PP_ServiceInterval.ssn from the Open
Session File window, and select OPEN to open
Vehicle Programming.
3. Click the right m ouse button and select Enter
Password.
4. Enter password in the dialog box, select OK.
NOTE: If the password is not entered or is not
entered correctly, you will get an error message
indicating the password does not match, and the
service interval will not reset.
EGES-270-1
Read all safety instructions in the "Safety Information" section of this manual before doing any procedures.
Follow all warnings, cautions, and notes.
© August 2008 Navistar, Inc.
To Next Page
Loading...
Need help?
General