NEC Electra Elite 48/192 - Page 101

A - 80 Automatic Trunk-to-Trunk Transfer
Issue 6 Electra Elite
5. Press
T
.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle.
When
a trunk is busy when 00 is dialed, it is not set. To set
the Automated Attendant to a busy trunk, dial the individual trunk number.
1. Press
T
.
2. Dial
FA
.
3. Dial the incoming trunk number (
KA
~
FD
).
4. Press
T
.
Note: Dialing 00 sets or cancels the Automated Attendant mode for all trunks when
the trunks are idle.
When
a trunk is busy when 00 is dialed, it is not set. To set
the Automated Attendant to a busy trunk, dial the individual trunk number.
1. Press
T
.
2. Dial
FB
.
3. Dial the incoming trunk number (
KA
~
FD
).
4. Press
T
.
Note: Dial 00 to set or cancel the Automatic Trunk-to-Trunk Mode for all trunks when
the trunks are idle.
When
a trunk is busy when 00 is dialed, it is not set. To set
Automated Trunk-to-Trunk mode to a busy trunk, dial the individual trunk
number.
1. Press
T
.
2. Dial
FD
.
3. Dial the incoming trunk number (
KA
~
FD
).
To set the Automatic Trunk-to-Trunk Transfer Mode from the
Attendant Position:
To cancel the Automatic Trunk-to-Trunk Transfer Mode from the
Attendant Position:
To confirm the Trunk Forward Assignment from the Multiline
Terminals with LCD: