Features and Specifications Manual C - 41
Call Forward - Display
C-10
FEATURE
DESCRIPTION
When a call is forwarded from one Multiline Terminal to another, the
forwarding indication and forward station number are shown on the Multiline
Terminal display.
System Software S2000 or higher is required.
SYSTEM
AVAILABILITY
Terminal Type:
All Display Multiline Terminals
Required Components:
Multiline Terminals with display. Refer to Call Forward - All Call and Call
Forward - Busy/No answer features.
OPERATING
PROCEDURES
SERVICE
CONDITIONS
General:
DIT, ANA, DID, Tie, Automated Attendant transfer, and SCD calls can
support Call Forward - Display.
This feature only supports forwarded calls to a primary station number.
When the destination is a CAR key, the forwarding display information is
not shown.
Internal calls do not show forwarding display.
None
To Next Page
Loading...