Features and Specifications Manual M - 11
Multilingual LCD Indication
M-5
FEATURE
DESCRIPTION
Multilingual LCD Indication provides the option for English, French, Japanese,
or Spanish characters on Multiline Terminals with an LCD. Language selection
is made per station using System Programming.
System Software S3000 or higher is required to display Japanese or
Spanish.
SYSTEM
AVAILABILITY
Terminal Type:
Multiline Terminals with LCD
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-09~18 (Customized Message 1~10 Assignment)
to program customized messages.
Use Memory Block 4-18 (Station Name Assignment) to customize
station names.
Use Memory Block 4-28 (Multilingual LCD Indication Selection) to
specify the language (JAPA, FREN, ENG, or SPAN) to be displayed.
Default is ENG.
Restrictions:
System software S3000 or higher is required to display Japanese or
Spanish.
Language changes for softkeys do not take affect on the DTP or DTU
terminal until the power to the terminal is shut off and then restored.
None
To Next Page
Loading...