W - 8 Wireless
Issue 6 Electra Elite
OPERATING
PROCEDURES
Voice Mail Indication
General Description
When a message is mailed to the D
term
PS II, the envelope icon is
displayed on its LCD along with a short ring tone.
OPERATING
PROCEDURES
1. Press
W
(LK1) to generate dial tone.
2. Dial the VM pilot number.
3. Follow the instructions given by the VM.
4. Listen to the message.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Blocks 7-1 (Card Interface Slot Assignment) to assign
the BSU(2)-U10 ETU (Page 4, LK 7).
Use Memory Block 1-2-21 (PS Telephone Block Assignment) to
specify the D
term
PS II stations.
Use Memory Block 4-10 (Station Number Assignment) to assign a
station number to each D
term
PS II station port.
Use Memory Block 4-12 (Line Key Selection for Telephone Mode) to
specify CAP keys or trunks to each D
term
PS II station.
Use Memory Block 4-18 (Station Name Assignments) to assign
names to the D
term
PS II stations.
Use Memory Block 1-2-30 (PS Out of Area Time Assignment) to
specify retry time when D
term
PS II is Out of Area.
Use Memory Block 4-11 (Ringing Line Preference Selection) to allow
each D
term
PS II station to answer incoming ringing calls by going off-
hook.
Use Memory Block 1-8-08 [Class of Service (Station) Feature
Refer to Speed Dial in the D
term
PS II User Guide.
To retrieve a voice mail message:
To Next Page
Loading...