Features and Specifications Manual A - 65
Automatic Hold
A-21
FEATURE
DESCRIPTION
Automatic Hold works when an Attendant at an Attendant Add-On Console
presses a DSS key programmed for station or page access during an outside
call or when a Multiline Terminal user, engaged in an outside call, presses a
Feature Access key or One-Touch key programmed for Direct Station
Selection or Direct Paging Access. This feature reduces the risk of
accidentally disconnecting a call and simplifies access to various features by
reducing the required operational steps.
SYSTEM
AVAILABILITY
Terminal Type:
Not applicable
Required Components:
None
OPERATING
PROCEDURES
1. Press the DSS/BLF key for the desired station or paging. The
original call is automatically placed on Non-Exclusive Hold.
2. Talk with called party, or page.
3. Press the held line key or Call Appearance key to return to the held
call.
While on an outside call at a Multiline Terminal:
To Next Page
Loading...