Features and Specifications Manual A - 35
Attendant Camp-On
A-12
FEATURE
DESCRIPTION
Attendant Camp-On, used at an Attendant Position with an Attendant Add-On
Console, allows a call to be transferred to a busy station. Press the Transfer
(TRF) key on the Attendant Add-On Console to send the Camp-On tone to the
busy station. When the station receives the camp-on tone, the call rings and
can be answered. A camp-on call that is not answered in a preprogrammed
time recalls to the Attendant Position.
SYSTEM
AVAILABILITY
Terminal Type:
Any Multiline Terminal with display programmed as an Attendant Position
Required Components:
DCU-60-1(BK)/(WH) Console or EDW-48-1/2(BK)/(SW) DSS/BLF
OPERATING
PROCEDURES
1. Press the DSS/BLF key on the Attendant Add-On Console or the
Attendant Position for the desired station.
2. Wait for call waiting tone.
3. Press
N
on the Attendant Add-On Console or on the Attendant
Position. Camp-On is set.
4. Go on hook.
5. After time-out, When the Camp-On is not answered, a recall tone is
received at the Attendant Position, and the LED on the assigned CO/
PBX line key or Call Appearance Key returns to flashing green.
6. Press the CO/PBX line key with the flashing green LED to return to
the call.
From an Attendant Position with a CO/PBX Call in progress:
To Next Page
Loading...