Features and Specifications Manual G - 1
General Purpose Relays
G-1
FEATURE
DESCRIPTION
Two relays are provided on the ECR-U10 ETU to use as an application
dictates. These relays are either off or on, and do not change state until a
station user manually makes the change.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Attendant Add-on Console
Required Components:
ECR-U10 ETU
OPERATING
PROCEDURES
1. Press the key assigned GPR0 or GPR1.
2. The GPR LED is on (red) to indicate the relay is closed (on), or Off to
indicate the relay is open (off).
1. Press
T
and dial
K
.
2. Dial the relay number
K
or
A
(for GPR0 or GPR1).
3. Dial the desired number and press
T
.
1. Press
T
and dial
K
.
2. Dial the relay number
K
or
A
(for GPR0 or GPR1).
3. Dial the
J
and press
T
.
To control the General Purpose Relay at the Attendant Add-On
Console:
To turn a General Purpose Relay on:
To turn a General Purpose Relay off:
To Next Page
Loading...