Features and Specifications Manual P - 21
Private Lines
P-9
FEATURE
DESCRIPTION
Two outside lines can be programmed as private lines. Only a Multiline
Terminal that is programmed for the Private Lines feature can have access to
these private lines. The Private Line LED status is not displayed on any other
Multiline Terminal.
SYSTEM
AVAILABILITY
Terminal Type
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-1-29 (Private Line Assignment) to assign two
Private Lines.
Use Memory Block 1-1-46 [Access Code (1-Digit) Assignment] or 1-1-47
[Access Code (2-Digit) Assignment] Function Number 050 or 051 to
assign access code for CO/PBX/Centrex Line Seizure. Private Lines
can be assigned to Single Line Telephones, and the user can access the
line by dialing the specified access code.
Restrictions:
Last Number Redial does not access a Private Line.
General:
The following combinations are possible:
• Two stations with individual Private Lines.
• Two stations sharing one Private Line.
• One station with two Private Lines.
None
To Next Page
Loading...