Features and Specifications Manual C - 1
Call Alert Notification
C-1
FEATURE
DESCRIPTION
Call Alert Notification allows a station user to receive an alert tone, flashing
ICM, Large LED, and LCD identification during an incoming call while the user
station is busy. This allows the station user to put the current call on hold to
answer a second call to increase call handling abilities.
This feature works with Call Forward - Busy/No Answer so the second
incoming call is queued to the station for eight seconds (default) before it is
forwarded.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Press
U
. The first call is put on hold.
2. Incoming caller is automatically connected.
1. Go on-hook on the first call.
2. Go off-hook to answer the incoming call.
To answer an incoming DIT, DID, Tie line, or Automated
Attendant transferred call on a Multiline Terminal, after receiving
a Call Alert Notification while talking with another party:
To answer the incoming call on any station (single-line station in
particular), after receiving a Call Alert Notification while talking
with another party:
To Next Page
Loading...