C - 2 Call Alert Notification
Issue 6 Electra Elite
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 1-2-22 (Call Forward - No Answer Time
Selection) to specify the time (default: 8s) before incoming intercom
or CO/PBX calls are forwarded to another station when there is no
answer.
Use Memory Block 4-42 (Call Forward - Busy Immediately/Delay
Selection) to specify immediate forward (NO) or delay forward
(default: YS) for an incoming call when the station is set for
Call Forward - Busy.
When a station with Call Forward - Busy assigned receives a second
call, this call follows the Call Forward - Busy setting either
immediately or after the Call Forward - No Answer time has expired.
When SLT Data Line Security is assigned in Memory Block 4-90 (SLT
Data Line Security Assignment) to a Multiline Terminal that allows
(default: LED On) Call Alert Notification in Memory Block 1-8-08
[Class of Service (Station) Feature Selection 2] using Page 3 LK8,
the tone is heard only through the speaker of the Multiline Terminal.
Restrictions:
When a station that has set DND receives a second call, Call Alert
Notification tone is not provided.
A station does not receive Call Alert Notification when Automatic
Redial is activated.
Call Alert Notification calls cannot be answered using Call Pickup.
Setting or canceling Call Forwarding is allowed only when logged out
of ACD.
General:
This feature is provided for DID, DIT, Tie line, internal transferred
calls, and Automated Attendant transferred calls.
When an Automated Attendant transferred call does not get
answered and changes to a normal CO ringing, the Call Alert
Notification is no longer provided at the station receiving the
transferred call.
When a station that has Call Forward - No Answer assigned receives
a second call, it follows the Call Forward - No Answer time before it is
forwarded.
When a station is already receiving a Call Alert Notification, an
additional internal call to this station provides Busy tone to the caller.
When Call Forward - Busy is set, the internal call follows this forward
setting.
To Next Page
Loading...