NEC Electra Elite 48/192 - Clock;Calendar Display

Features and Specifications Manual C - 71
Clock/Calendar Display
C-18
FEATURE
DESCRIPTION
The Clock/Calender Display is available on Multiline Display Terminals. This
feature displays the time and day of week on the LCD and is programmable
from the first two station ports in the system.
Using System Software S6000 or higher, the system can automatically
adjust the clock for Daylight Savings Time.
SYSTEM
AVAILABILITY
Terminal Type:
All MultilineTerminals with LCD
Required Components:
None
OPERATING
PROCEDURE
1. Press
T
.
2. Dial
I
.
3. Dial
L
.
4. Dial current time (e.g.,
KC
:
BI
).
5. Press
S
to toggle AM/PM.

When only setting the time, press
T
to end the procedure.
6. Press
U
to advance to the calender.
7. Press
S
to select the day of the week.
8. Press
L
to move the cursor to the day of month setting.
9. Use the dial pad to enter the day.
10. Press
S
to select the month.
11. Press
L
to move the cursor to the year setting.
To set the Clock/Calender at a Multiline Terminal with LCD
connected to Port 01 or 02.: