Features and Specifications Manual I - 5
Incoming Call Identification
I-3
FEATURE
DESCRIPTION
Incoming Call Identification (provided for Internal Ring Transfer, Call Forward,
and CO Transfer Ring) displays caller name or station number on Multiline
Terminals with an LCD. Internal calls are identified by caller name and station
number. .A ringing Tie line/DID call generates a display on the LCD of the line
number. When Caller ID is provided, the CO incoming caller directory number
or name is displayed.
System Software S4000 or higher allows both name and number to be
displayed by Caller ID.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals with LCD
Required Components:
None
OPERATING
PROCEDURES
1. The ICM LED flashes.
2. The caller station number and name (when assigned) are displayed
on the LCD.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 3-00 (Trunk Name/Number Assignment) to specify
the Name or Number for accommodated CO/PBX lines for display when
the line is seized or during an incoming call.
Use Memory Block 4-18 (Station Name Assignment) to assign Names to
telephone stations.
For an incoming internal call:
To Next Page
Loading...