I - 4 Incoming Trunk Name or Number Display
Issue 6 Electra Elite
General:
Each CO/PBX trunk can have a name (13 character-maximum,
including spaces) or number assigned.
This display function is valid for general incoming CO/PBX calls.
A maximum of 13 digits or characters can be displayed.
When a Caller ID CO call is terminated to a trunk assigned trunk
name/number, the trunk name/number is displayed. In this case, the
Caller ID data is not stored.
When an ACD/SCD/UCD call is received, the trunk name/number is
displayed when assigned. The Electra Elite 48 system does not
support ACD.
To Next Page
Loading...