Features and Specifications Manual O - 5
One-Touch Feature Access
O-3
FEATURE
DESCRIPTION
One-Touch Feature Access is provided with Multiline Terminals to allow a
Multiline Terminal user to press a single, flexible Feature Access key or
One-Touch key to access many system features or System/Station Speed Dial
without going off-hook first.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Restrictions:
Feature Access keys and One-Touch keys are similar in purpose and
ability. Up to 10 feature access keys are available depending on system
programming and available Line keys. One-Touch key availability is
controlled by the type of Multiline Terminal.
General:
You can press a single key to call a station, access a Speed Dial buffer,
or activate a feature.
The ETW-24DS-1/2(BK)/(SW) TEL has 12 user-programmable One-
Touch keys. The user can program these keys for Speed Dial, DSS, and
selected features (e.g., Call Pickup, Paging, DND set, or DND cancel).
BLF is not provided with these keys.
When the MIC key is programmed on a One-Touch Feature Access Key,
set/cancel is operated by toggle.
Trunk access can be programmed on a Feature Access or One-Touch
key.
Refer to Related Features for the Operating Procedures.
To Next Page
Loading...