NEC Electra Elite 48/192 - Automatic Route Selection (ARS

Features and Specifications Manual A - 77
Automatic Route Selection (ARS)
A-25
FEATURE
DESCRIPTION
Automatic Route Selection (ARS) allows an outgoing line to be seized using a
Trunk Group or Route Advance Block (RAB) for each number dialed by the
user. The ARS feature allows more efficient use of the trunks connected to the
system.
System Software S4000 or higher is required.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Lift the handset, and wait for dial tone.
2. Dial ARS access code
I
(default) and receive LCR dial tone.
3. Dial the desired number.
SERVICE
CONDITIONS
Data Assignments
 Use Memory Block 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] (Function No. 101) to assign an access code.
 Use Memory Block 3-03 (Trunk-to-Trunk Group Assignment) to make
Trunk-to-Trunk Group Assignment.
 Use Memory Block 4-40 (LCR Class Selection) to specify the LCR Class
(default: 0) for each station.
 Use Memory Block 1-8-08 [Class of Service (Station) Feature Selection
2] Page 6 LK1 to program Trunk Groups 2~32 to Allow (LED On) or
Deny (default: LED Off) ARS Bypass.
To use this feature: