NEC Electra Elite 48/192 - Flexible Ringing Assignment

Features and Specifications Manual F - 11
Flexible Ringing Assignment
F-5
FEATURE
DESCRIPTION
Flexible Ringing Assignments for incoming outside calls and Secondary
Incoming Extension appearances can be programmed to ring at specified
Multiline Terminals. Separate day and night ring assignments are available,
and Delayed Ringing is an option for Multiline Terminals.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
 Use Memory Block 1-1-28 (Distinctive Ringing by Telephone or CO
Selection) to select distinctive ringing for either TEL (default) or CO.
 Use Memory Block 3-07 (CO/PBX Ringing Variation Selection) to set the
ringing tone, per line, to Low, Medium (default), or High for incoming
outside line calls to CO/PBX lines.
 Use Memory Block 4-91 (Telephone Ringing Variation Selection) to set
the ringing tone, per line, to Low, Medium (default), or High for incoming
outside line calls to Telephones.
 Use Memory Block 4-01[CO/PBX Ring Assignment (Day Mode)] or 4-02
[CO/PBX Ring Assignment (Night Mode)] to assign incoming calls to ring
on terminals in Day/Night Mode.
 Use Memory Block 4-37 [Extension Line Key Ring Assignment (Day
Mode)] or 4-38 [Extension Line Key Ring Assignment (Night Mode)] to
assign Day/Night Mode ringing on incoming calls to Secondary Incoming
Extensions and Call Arrival Keys, per extension/per line key, when
assigned on a Flexible Line key.
None