Features and Specifications Manual I - 1
I-Hold Indication
I-1
FEATURE
DESCRIPTION
I-Hold Indication provides a green LED line key indication for calls held at a
Multiline Terminal. Calls held at other stations provide a red LED line key
indication. This feature allows easy identification of calls the user placed on
hold.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
Press
U
(the call is placed on Non-Exclusive Hold).
- OR -
Press
T
, and then
U
(the call is placed on Exclusive Hold).
SERVICE
CONDITIONS
The I-Hold and other hold-flash rates are the same, 0.25 seconds ON/
0.25 seconds OFF.
When a call is placed on Exclusive Hold, all other Multiline Terminals
with that line appearance receive a busy indication (steady red LED).
Internal calls can be put on Exclusive Hold only.
Answer Hold, Transfer Hold, and Conference Hold use the I-Hold
indication.
To place a call on Hold:
To Next Page
Loading...