Features and Specifications Manual M - 13
Multiple Trunk Groups
M-6
FEATURE
DESCRIPTION
A maximum of 32 Trunk groups may be assigned. Each group can have a
separate Trunk Group Access Code. Assigning Trunk groups provides access
to different outside trunks. With Tenant Service, different tenants can be
programmed to access only their Trunk group.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Lift the handset, and wait for internal dial tone.
2. Dial the Trunk Group Access Code.
3. Wait for outside dial tone.
4. Dial the desired telephone number.
SERVICE
CONDITIONS
Data Assignment:
Use Memory Blocks 1-1-46~48 [Access Code (1-, 2-, or 3-Digit)
Assignment] Function Number 101 to assign a Dial Access Code (up to
three digits) for Trunk groups.
To use this feature at any station:
To Next Page
Loading...