Features and Specifications Manual S - 67
Stored Hookflash
S-21
FEATURE
DESCRIPTION
Stored Hookflash allows any Multiline Terminal user to store a hookflash in a
Speed Dial buffer to allow one-step access to certain Centrex or PBX features.
System Software S4000 or higher permits input stored characters to be
entered on the dial pad, but does not allow the Character Code Table to
be used.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
1. Press
T
.
2. Press
Q
.
3. Press the Feature Access key.
4. Dial
K
.
5. Dial the Trunk or Trunk Group Access Code (maximum four digits).
6. Press
S
to enter a hookflash.
7. Dial the desired telephone number.
8. Press
U
, and enter name using the Character Code Table.
- OR -
9. Use the dial pad to enter the name.
Refer to S-11 Speed Dial Stored Characters.
10. Press
T
.
To program a Hookflash in Feature Access key programmed for
Speed Dial:
To Next Page
Loading...