NEC Electra Elite 48/192 - Page 573

S - 68 Stored Hookflash
Issue 6 Electra Elite
1. Press
T
.
2. Press
Q
.
3. Press the One-Touch key.
4. Dial
K
.
5. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
6. Press
S
to enter a hookflash.
7. Dial the desired telephone number.
8. Press
T
.
1. Press
T
.
2. Press
Q
.
3. Dial the System Speed Dial buffer number (
KK
~
GI
or
KKK
~
III
).
4. Dial the Trunk or Trunk Group Access Code (maximum four
digits).
5. Press
S
to enter a hookflash.
6. Dial the desired telephone number.
7. Press
U
, and enter name using the Character Code Table.
- OR -
8. Use the dial pad to enter the name.

Refer to S-11 Speed Dial Stored Characters.
9. Press
T
.
To program a Hookflash on a One-Touch key programmed for
Speed Dial:
To program a Hookflash in the System Speed Dial buffer
(Attendant Position only):