Features and Specifications Manual A - 27
Assigned Night Answer (ANA)
A-10
FEATURE
DESCRIPTION
Assigned Night Answer (ANA) is a Direct Inward Termination programmed to
ring directly at a selected station when the system or tenant is in Night Mode.
This assignment operates independently from the DIT (Day Mode) ringing
assignment.
System Software S4000 or higher is required to support delay ringing to
ANA or ANA trunks to a tenant.
SYSTEM
AVAILABILITY
Terminal Type:
All Multiline Terminals
Required Components:
None
OPERATING
PROCEDURES
SERVICE
CONDITIONS
Data Assignment:
Use Memory Block 3-43 (ANA Assignment) to assign CO/PBX lines to
ring a station number, a hunt group master number, or an ACD/UCD
Pilot number. Default is not assigned.
Multiple CO/PBX lines can be assigned to ring at the same station, hunt
group master number, or ACD/UCD Pilot number.
Incoming ANA calls follow the station Call Forward setting.
Use Memory Block 3-61 (DIT/ANA Delay Answer Time Selection) to
specify the delay time (default: 0s) before the call rings at the ANA
destination. System Software S4000 or higher is required.
Use Memory Block 3-62 (DIT Tenant assignment) to assign each trunk to
a Master Tenant. System Software S4000 or higher is required.
Normal incoming call handling procedures apply.
To Next Page
Loading...