A - 28 Assigned Night Answer (ANA)
Issue 6 Electra Elite
Restrictions:
When a CO/PBX line is assigned for ANA, the Night Mode CO/PBX
ring assignment is disabled.
General:
ANA incoming ringing is assigned for Distinctive Ring or
Synchronous Ring system-wide.
When a busy station, programmed for ANA, receives an incoming
ANA call, the system provides Camp-On tone for the busy station.
The calling party receives ringback tone until the call is answered.
A Call Pickup for the same tenant, Access Code 68 (default), can be
used to answer ANA calls.
ANA calls do not activate External Tone Ringer or Night Chime.
ANA calls can be assigned to ring on voice mail ports. A hunt group
can be assigned by using the internal master hunt number
assignments.
When a station, programmed for ANA, receives an incoming ANA
call, internal ring tone is heard at all stations where a secondary
incoming extension appears and is assigned to ring.
Incoming ANA calls cannot be answered directly at the CO line key
appearance. The CO line key indicates Other Use (red LED).
While an incoming ANA call is being received, an internal call cannot
be made.
When Memory Block 3-61 (DIT/ANA Delay Answer Time Selection)
is set to 0 (default), ANA is performed immediately after call
termination. System Software S4000 or higher is required.
Use Memory Block 3-63 (DIT Weekend Mode Selection) to allow or
deny the ANA delay to follow the weekend setting when a tenant is
placed in weekend mode. System Software S4000 or higher is
required.
Use Memory Block 3-64 (DIT Night Mode Delay Answer Selection) to
allow or deny the ANA delay to follow the night mode setting system-
wide or when a tenant is placed in night mode. System Software
S4000 or higher is required.
RELATED FEATURES
LIST
Feature
Number
Feature Name
D-11 Direct Inward Terminatio n(DIT)
To Next Page
Loading...